Welcome to the website of Dongguan Youjiang Electromechanical Equipment Co., Ltd.!
  • 中文 中文版
  • English English
    • Service Hotline:+86 13827289405
    Hot search products: Tyre machine、 Tire wire drawing machine、 Lifting platform、 Mobile boarding bridge、
    Your location: Home page -> News Center -> problem -> Simple use and skills of tyre changer
    en.dgyoujiang.com
    Simple use and skills of tyre changer

    The information comes from:the Internet posted on:2021-09-30

        The tire changer is an essential car maintenance equipment for every 4S shop, auto repair shop and auto repair shop. In the case of the application of the tire changer in the car repair, there will be some tips, here is simple Describe the tips of the tire changer in the whole application process, and look forward to helping those who learn to remove tires at the beginning:
    轮胎拆胎机

        1. For tires with good but soft and thin vulcanized rubber at the top of the tire: When shoveling the tire with a wind shovel, you can slightly lift the wind shovel to operate the pedal, and at the same time push the tire inward to determine the shovel opening and the tire opening. Touch, and then lean on with your legs or hands to prevent the tire from returning, and then step on the operating pedal. At this time, it is easier to shovel the tire off.

        2. For the long tires of super sports cars: the tires are exposed to the internal standard pressure for a long time, and the heat caused by the friction between the tires and the road surface causes the tires to adhere to the rigid ring. When the wind shovel is difficult to shovel, you can first dissolve the detergent in the water, and use a small brush to brush more water solution on the bead and rigid ring. After the aqueous solution penetrates into the gap between the bead and rigid ring, use the wind shovel to shovel off the tire.

        3. For tires with harder tire openings: It is better to use spring steel for small cars when picking up tires. It is very easy to make an extended crowbar to pry the tires to the bird's head. When putting on the tire, use both hands to press the tire belly, 200mm up and down. When the tire opening is at the tightest point, use your left elbow to press the tire belly strongly. At the same time, take the opportunity with your right hand and push the tire clockwise to avoid the motor and triangle. With deviation, at the same time it can also maintain the motor of the tire changer.
    [ Previous: Maintenance and maintenance of tire changer ]　 　 [ Next: Several major points of attention when using the tire changer ]　 　 [ return ]

    +86 13827289405

    Monday to Saturday 8:30-20:00
    （Welcome to inquire ）

    Online service

    Dongguan Youjiang Electromechanical Equipment Co., Ltd. © Copyright Technical Support: wangyikeji 【GMAP】 【BMAP】 【Website management 】 【Back to top 】